Furnace & Heating Maintenance

Home Furnace & Heating Systems Maintenance

The winters in New York can become not only uncomfortable, but downright dangerous. Make sure your heater is up to the task with our home heating maintenance service.

Interstate Air Conditioning and Heating is a family owned business that specializes in the service and maintenance on all furnace & heating systems in the greater New York area. We specialize in delivering maintenance service with precision and commitment to provide satisfaction for all of our customers.

We will ensure that your home furnace & heating system operates at its most efficient performance to ensure that your home and family will be in perfect comfort. Our certified technicians work off of a specific heating preventive maintenance checklist depending on the type of furnace & heating equipment you have.

Heat Pump System

If you have a heat pump system, call us 646-741-4060 for a heating tune up. Our heating tune ups consist of the following:

1. Our certified technicians first check and adjust the thermostat.
2. Check all voltage to heating unit.
3. Check and make sure both inside and outside units turn on.
4. Replace plugged air filter or clean if you have a reusable air filter.
5. Lubricate blower motor if needed & check the bearings.
6. Check and replace the blower belt if needed.
7. Check belt tension and adjust if needed.
8. Check the evaporator coil to see if it needs to be pressure washed.
9. Check ampere readings on all motors.
10. Check all the electric heaters with the amp probe and voltage during heating tune up.
11. Check and lubricate condenser motor bearings.
12. Take ampere readings of condenser motor.
13. Check refrigerant levels (FREON).
14. Perform visual inspection to search for oil and refrigerant leaks.
15. Take ampere readings on compressor
16. Check the compressor crankcase heater.
17. Check functionality of all defrost controls.
18. Check operation of reversing valve.
19. Check the temperature of the coil.
20. Check condensate drain pan and advise if there are any issues.
21. Clean out drain line using high pressure CO2.
22. Visually inspect ductwork for air leakage.
23. Check overall operation of heat pump system.

Call us today 646-741-4060 to have our certified technician perform a heating preventive maintenance tune up at your New York City location.

Electric Heat System

If you have an electric heater, call us 646-741-4060 for a heating tune up. Our heating tune ups consist of the following:

1. Our certified technicians first check and adjust the thermostat.
2. Check all voltage of heating unit.
3. Check and make sure the inside unit turns on.
4. Replace plugged air filter or clean if you have a reusable air filter.
5. Lubricate blower motor if needed & check the bearings.
6. Check and replace the blower belt if needed.
7. Check belt tension and adjust if needed.
8. Check the evaporator coil to see if it needs to be pressure washed.
9. Check ampere readings on all motors.
10. Check amperage draw on each element.
11. Check amperage draw on all the elements.
12. Check the heat sequencer.
13. Check all electrical connections and wiring.
14. Check for temperature rise.
15. Check the heat anticipator
16. Check the supply temperature.
17. Check functionality of all controls.
18. Clean out drain line using high pressure CO2.
19. Visually inspect ductwork for air leakage.
20. Check overall operation of electric heat system.

Call us today 646-741-4060 to speak with a comfort adviser and possibly have our certified technician perform a heating preventive maintenance tune up at your New York City location.

Gas Furnace System

If you have a gas furnace heating system, call us 646-741-4060 for a heating tune up. Our furnace heating tune ups consist of the following:

1. Our certified technicians first check and adjust the thermostat.
2. Check operation of heat anticipator.
3. Check and make sure the gas furnace turns on.
4. Replace plugged air filter or clean if you have a reusable air filter.
5. Lubricate blower motor if needed & check the bearings.
6. Check and replace the blower belt if needed.
7. Check belt tension and adjust if needed.
8. Check the flue to see if there is any corrosion or rust.
9. Check operation of flue and notify customer of any discrepancies.
10. Check and clean pilot if needed.
11. Adjust pilot if needed.
12. Check electronic spark ignition control module for proper operation.
13. Check operation of burners.
14. Check wiring connections and controls.
15. Check heat exchanger for cracks.
16. Check heat exchanger for rust and dirt.
17. Recheck heat exchanger for cracks while heat unit in operation.
18. Check operation of inducer fan motor.
19.Check operation of blower fan motor.
20. Check all fan controls.
21. Check and test safety shutoff.
22. Check condensate drain pan for dirt and cracks.
23. Clean drain line using high pressured CO2
24. Visually inspect ductwork for air leakage.
25. Check overall operation of gas furnace system.

Call us today 646-741-4060 to have our certified technician perform a heating preventive maintenance tune up at your New York City location.

Place A Service Call
  • captcha
  • In The News